Wireless Triaxial Acceleration Sensor
Wireless triaxial acceleration sensor for structural vibration monitoring with selectable +/-2 g, +/-4 g, or +/-8 g range, 0.1 mg minimum resolution, 0 to 125 Hz bandwidth, 4G transmission, IP66 enclosure, and 9-24 VDC power.
System Category
DL-WM
Signal Type
Triaxial acceleration
Communication
4G wireless transmission
Application Fit
Typical applications for this product
Industrial Equipment Monitoring
Monitor rotating machinery and industrial equipment condition including vibration, torque, shaft power, rotational speed, shaft torsional vibration, and operational condition trends.
Typical configuration reference
Cultural Heritage Monitoring System
Monitor crack evolution, structural vibration response, tilt, displacement, long-term deformation, rock-mass fissure evolution, weathering-related structural degradation, stability trends, and environmental or human-activity impact for protected heritage assets.
Typical configuration reference
Civil Infrastructure Structural Monitoring
Monitor civil infrastructure deformation, strain, vibration, displacement, tilt, cracks, settlement, GNSS movement, cable force, seismic response, and construction-stage structural behavior.
Typical configuration reference
Research & Engineering Testing
Capture modal response, vibration response, dynamic strain, torque, speed, temperature, pressure, force, displacement, and synchronized multi-channel data for engineering verification.
Typical configuration reference
Product Image and Application Context
Visual reference for Wireless Triaxial Acceleration Sensor
Product images are used when available for RFQ evaluation and product recognition.
Primary Product Image
Product image configured for this product.
Bridge
Typical surface mounted base with four m4 screws deployment for project configuration.
Building
Typical surface mounted base with four m4 screws deployment for project configuration.
Wind
Typical surface mounted base with four m4 screws deployment for project configuration.
Technical Specifications
Category
DL-WM
Measurement Range
+/-2 g, +/-4 g, or +/-8 g
Sampling Rate
0 to 125 Hz bandwidth
Communication Protocol
4G wireless transmission
Protection Level
IP66
Power Supply
9-24 VDC
Application Tags
Bridge, Building, Wind, Port, Heritage
Installation Type
Surface mounted base with four M4 screws
Engineering Applications
Where this DL product is applied
Selectable acceleration ranges support bridge, tower, high-rise, port, and heritage-structure vibration monitoring.
Triaxial output, 0.1 mg minimum resolution, and 0 to 125 Hz bandwidth support low-frequency structural response observation.
4G wireless transmission reduces field cabling for distributed monitoring points.
Technical basis may reference GB/T 20485 and GB/T 13823 vibration and shock sensor calibration methods.
Typical Use Cases
Typical monitoring use cases
Bridge and tower vibration monitoring where wireless acceleration channels reduce cabling work.
High-rise, port, wind tower, and heritage structures requiring triaxial vibration trend data.
System Integration Context
Sensor, DAQ, and software context
Keep the sensor base in full contact with the measured surface and control installation tilt within the allowed range.
Confirm 9-24 VDC supply, 4G coverage, measurement direction, and enclosure requirements before deployment.
Preserve calibration references such as GB/T 20485.31, GB/T 20485.22, GB/T 20485.21, and GB/T 13823 methods in technical documentation.